|
Command |
Function |
|
dig |
DNS information & diagnostics |
|
netconfig |
Presents a simple to use console menu where you can configure the virtual appliance’s network settings. |
|
netstat |
Displays network connections and statistics |
|
nslookup |
DNS troubleshooting |
|
passwd |
To change password for the fadmin account use ‘passwd fadmin’ |
|
ping |
Network connectivity & troubleshooting |
|
traceroute |
Determines the route taken by packets to reach a destination |
|
tenant-enable |
Enables multi-tenancy mode |
|
tenant-disable |
Disables multi-tenancy mode |
|
tenant-add “tenant-name” subdomain |
Adds a tenant, specify a friendly tenant name first in quotes followed by the required subdomain that will be used |
|
tenant-list |
Shows all tenants and the status of the encryption keys for each |
|
tenant-sync ip-1 ip-2 -p password |
Synchronises tenants across multiple appliances. Optionally specify the fadmin password for all appliances with the -p option. |
|
Tenant-reset-password subdomain |
Reset the tenant admin (tadmin) account for the given subdomain. The password will be reset to ‘password’ without quotes. |
|
Install-xen-guest-utils |
Installs the Citrix XenTools guest drivers for improved system performance. Requires the xs-tools ISO to be mounted in XenCenter. |
|
support-enable |
Enables fsupport mode. This can be used a technical support representative to log in for troubleshooting purposes or performing a password reset for the fadmin account. |
|
iptables |
Modifies the built-in firewall. All rules should be commented -m comment —comment “foldr-admin” to enable the rules to persist after a system update |
|
iptables-save |
Commits all firewall rules so they are permanently saved. |
|
add-interface ethx |
Creates an additional network interface. This must be used before you can configure these NICs with the netconfig menu. The appliance supports a maximum of 4 virtual NICs (eth0 – eth3) |
|
remove-interface ethx |
Removes additional network interface. |
|
set-routes ethx |
Set static routes for additional network interfaces |
|
ethtool -P ethx |
Displays the MAC address for interface ethx in the example. Useful if you have attached multiple interfaces to the appliance for identification purposes |
|
certificate-reset |
Resets the SSL certificate installation back to the self-signed (default) certificate |
|
time-sync ntp-server |
Forces the appliance system clock to sync with an NTP server. NTP must be selected within Foldr Settings > Appliance > Time Settings for this command to work successfully. |
|
ocsp-enable | disable |
Enables or disables OCSP stapling (default = disabled) |
|
flush-cache |
Flushes cached database entries on the server |
|
set-ciphers modern | default |
Configures the appliance web server SSL configuration. ‘Modern’ disables TLS 1.0, 1.1 and also disables the weaker (3DES) cipher suites. |
|
smb-mode legacy|default|modern|edge |
Configures SMB protocol on the appliance. The different modes are explained below:
legacy = sets max client protocol to SMB1 default = sets max client protocol to SMB2 modern = sets min client protocol to SMB2 & max client protocol to SMB3 edge = set max client protocol to SMB3 |
|
http-test <URL> |
Performs HTTP(S) connectivity tests using cURL. Example command to show verbose output: http-test -v https://letsencrypt.org |
|
ldap-test <filter> |
Performs LDAP(S) tests using ldapsearch |
|
install-datto-agent |
Downloads and installs the Datto Linux backup agent |
|
search-reserve-mem x |
Reserves xGB of RAM for non-search related functions (recommended minimum of 2) |
|
remove-tc-log |
Removes the transaction co-ordinator log file to aid with database recovery/start |
|
db-bootstrap |
Marks the local database as ‘safe to bootstrap’ – Useful to recover a cluster that has not shut down gracefully |
|
list-checkouts |
Lists all checkouts currently made by users, either manually or via an Edit in Office session in the web app |
|
remove-checkouts <days> |
Removes all checkouts older than the <days> specified |
|
remove-devices <days> |
Removes all user devices (including browsers) that were last seen older than the number of <days> specified |
|
set-inbox-allow-from ‘<addreses>’ |
Configures the Foldr server to only receive email from the hosts specified. |
|
install-nutanix-guest-tools |
Installs the Nutanix AHV hypervisor tools |